Publicité
Step 9
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D12 and D13).
å
Fasten a DRAWER RIGHT (35AC) to the RIGHT DRAWER SIDE (D12) and a DRAWER LEFT (35AD) to the LEFT DRAWER
å
SIDE (D13). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The glides are not intended to rotate.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten the PULL (101K) to the DRAWER FRONT (H).
å
Use two SILVER 5/8" MACHINE SCREWS (15S).
2
www.sauder.com/services
Glide end
1
D13
H
101K
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
SILVER 5/8" MACHINE SCREW
10A
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
D12
3S
416868
15S
(2 used for the PULL)
10A
Glide end
1
2
Page 13
Publicité
