Table des Matières
Publicité
Getting started
7. To heat water to selected
GB
temperature (not boiling):
1. Press the Temperature selection
button to select temperature. 2. Then
press the Power button.
When the selected temperature is
reached, the kettle will automatically
switch off .
Cleaning
1. Before cleaning, always unplug the
appliance. Never rinse or immerse
the kettle or base unit in water. Just
wipe with a damp cloth, using no
abrasive detergents. Occasionally
rinse out the kettle with clean water.
18
8. To boil water then keep it warm at
selected temperature:
1. Press the Keep warm button to
select the keep warm temperature. 2.
Then press the Power button.
This function will switch off after 30
minutes. Then the buzzer will buzz.
2. To clean the mesh fi lter, grab the
strainer insert and lift out.
Cleaning the heating plate –
superfi cial spots of rust may appear
on the base unit. Remove with a
stainless steel cleaning agent.
9. To heat water to selected
temperature (not boiling) and keep
it warm.
1. Press the Temperature selection
button to select temperature. 2. Then
press the Keep warm button. 3. Then
press the Power button.
This function will switch off after 30
minutes. Then the buzzer will buzz.
3. Decalcifying is recommended
regularly, depending on water
hardness. Fill the kettle with
water and decalcifi er according to
decalcifi er product instructions.
Do not boil the solution as it may
foam over. Afterwards, rinse kettle
thorougly with fresh water.
Publicité
Table des Matières
