j) Mounting the Steering Wheel and Railing
The supply includes a steering wheel and a railing
with life buoys as well. These accessories must be
pushed into the prefabricated holes in the boat deck
and glued on there with a little 5-minute epoxy resin
(or superglue).
k) Cover of the Upper Deck
The boat body is open in the cabin area for installation of the receiver system and can be closed with a matching
cover with a safety clip.
Attention!
Never drive with the boat deck open. For use with high waves and/or slants, the cover additionally needs to
be sealed with a few strips of transparent adhesive tape.
38
Figure 11
Figure 12