Tension Mast - Reely Discovery II Notice D'emploi

i) Tension Mast
• Every tensioning rope is applied with a number ex
works, see figure 9.
• Figure 10 shows where the rope has to be attached
(e.g. rope with number 2 to position 2 at the fusela-
ge, see figure 10).
• Once all ropes are attached to the correct position
and closed correctly, all ropes must be tensioned
with the integrated tensioners so that the mast will
not bend in any direction while the sail that catches
the wind in operation cannot tip or twist in one direc-
tion.
• After the mast is tensioned, the tensioners of the
mainsail and head sail have to pull the sails up
tensely.
Figure 9
Figure 10
37