Using An Ac Adapter; Emergency Operation With No Power Source - Eton FR350 Manuel D'opération

USING AN AC ADAPTER

Once plugged in, the AC adapter acts as a charger, charging the inter-
nal Ni-MH battery pack. Charge it for 8 hours to achieve a full charge.
1. Plug the adapter into the DC 4.5 V socket.
2. For power, set the BATTERY/DYNAMO-ADAPTER/OFF switch to
the DYNAMO-ADAPTER position.
Only use an AC adapter of 4.5 VDC, negative polarity and 100mA
current capability. To order the correct AC adapter call the toll free
number shown at the beginning of this manual, ask for the parts
department and order part # GPU3504.
EMERGENCY OPERATION WITH NO
POWER SOURCE
1. Set power selector switch to DYNAMO/ADAPTOR.
2. While continually turning the dynamo crank, radio stations can
be tuned and the lights and siren function.
CELL PHONE CRANK CHARGING
Because cell phone batteries vary in their current ratings, we cannot
specify charging rates or usage time. 10 to 15 minutes of cranking
may result in 1 or more minutes of talk-time.
1. Set power selector switch to OFF position.
2. Flip open the socket cover and plug the cell phone charging cord
into the Phone Charge socket.
3. Select the correct charging tip for your phone.
4. Plug charging tip into the charging cord and into the phone's
charging socket.
5. Rotate the dynamo crank.
FR350 OWNER'S MANUAL
5