Ordinary Maintenance - fadini DARDO 430 Notice D'instructions

DARDO 430 DARDO 430

ORDINARY MAINTENANCE

It is recommended that the operators and all the moving parts be inspected periodically (every 2-3 months or whenever
necessary) and the inner rolled screw shaft lubricated with some grease from underneath the operator.
it is also advised that the gate hinges and pivots be periodically lubricated as well.
Remove any possible obstacles and hindrances, the gates must be able to move freely in open and close directions.
GREASE
GREASE
Ceck that photocells are free
GREASE
Gate fixing
pivot
electromechanical operator for swinging gates
from obstacles or
disturbance.
Re-align if necessary
GREASE
GREASE
GREASE
On the inner
rolled screw shaft
25
Pic. 17
GREASE
Gate post
fixing pivot
Pic. 18