Cleaning & Storage - ecofort ecoQ Sole 360 Instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING & STORAGE
We recommend that the heater is cleaned at least once a month and always before
storage. Turn the heater OFF, unplug the heater and allow it cool down. Use a dry
cloth to clean the external surface of the heater.
DO NOT USE, WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION.
If your heater fails to operate:
Be sure the heater is plugged into the power supply and that the electrical outlet is in working order.
Check for obstructions. If you find any obstruction, turn the heater OFF, unplug the heater from the
power supply and wait for it to cool down. Carefully remove the obstruction, plug the heater into the
power supply and restart the unit as described in the operation guide.
If the defect persists, discontinue use and consult the store where you bought the heater.
23

Publicité

Table des Matières
loading

Table des Matières