Important Safety Instructions - ecofort ecoQ Sole 360 Instructions

INTRODUCTION
Thank you for purchasing the ecoQ Sole 360° radiant heater.
Please check the ecoQ Sole 360° immediately after receipt for transport damage. Report any damage to the
transport company (parcel service, post office, etc.) immediately upon delivery and note it on the shipping
document or forwarding bill. If you notice any transport damage after unpacking the device, please contact
your specialized dealer immediately.
Keep the device packaging in order to be able to ship the device safely in the event of a warranty claim. To
save space, simply cut the adhesive tape with a knife and fold up the box.
Read these instructions carefully before operating the ecoQ Sole 360° and keep the instructions afterwards.
Pass these instructions on to any subsequent user.
WARNING
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
We cannot be liable for any damages caused by failure to observe these instructions.

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY-The infrared heater is designed for safe operation. Nevertheless, installation,
maintenance and operation of the heater can be dangerous. Observing the following procedures will
reduce the risk of fire, electric shock, injury to persons and keep installation time to a minimum. Save these
instructions for future reference.
1. Do not use this heater if it has been dropped.
2. Do not use if there are visible signs of damage to the heater.
3. Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.
4. WARNING: Do not use this heater in small rooms when they are occupied by persons
not capable of leaving the room on their own, unless constant supervision is provided.
5. WARNING: To reduce the risk of fire, keep textiles, curtains or any other flammable
material a minimum distance of 1 m from the heat outlet.
6. Children of less than 3 years should be kept away unless continuously supervised.
19