Publicité
Step 8
Fasten ten ANGLE BRACKETS (5G) to the ENDS (A, B, C, and D) and FIXED SHELVES (E). Use ten BLACK 9/16" LARGE
å
HEAD SCREWS (1S).
NOTE: Be sure the edges of the ANGLE BRACKETS are even with the edges of the ENDS and SHELVES.
å
Fasten the BASE MOLDING (L) and VALANCE (P) to the ENDS (A, B, C, and D) and FIXED SHELVES (E). Use ten BLACK
å
9/16" LARGE HEAD SCREWS (1S) through the ANGLE BRACKETS on the ENDS and SHELVES and into the BASE
MOLDING and VALANCE.
BLACK 9/16" LARGE HEAD SCREW
(20 used in this step)
5G
L
E
5G
(10 used)
5G
Page 12
1S
5G
D
B
C
418734
P
E
A
www.sauder.com/services
Publicité
