Service And Maintenance; Maintenance Instruction - Ega Master AQUAMaster 79902 Manuel D'instructions

Basic Safety Instructions:
WARNING – Maintenance and repair work on pneumatic equipment.
Compressed air can cause severe injury. Observe legal regulations. Take precautions for persons and
environment.
Additionally, observe the following:
• Secure the machine against unintentional starting and let the machine cool down to the ambient
temperature
• Protection against tipping, tumbling or falling down when assembling/ disassembling the machine/
parts.
CAUTION – Skin exposure to hazardous dusts may cause severe dermatitis. Dust at the work place
can be raised during the maintenance procedure and can be inhaled.
Clean the machine and the work place before maintenance work.
WARNING – Danger of explosion! Generation of sparks during maintenance work!
Consider local safety regulations. Avoid use of force when disassembling and assembling the machine.
Always do maintenance work outside hazardous medium.
PROHIBITION
Eating, drinking and smoking are forbidden during maintenance and repair work.
NOTICE – Only use original the manufacturer, in order to avoid damages. Otherwise you risk a
decrease in machine performance and an increase in maintenance work. Check the adherence to the
technical specifications according to the operation manual after each maintenance work.
IMPORTANT – There is no warranty for damages and liability is disclaimed, if non-original spare parts are
used.

Maintenance Instruction

Generally, pneumatic machines need little maintenance. If these rules are followed, the machine will have the
expected durability and high reliability. Service life and performance of the machines are decisively determined by:
• The air purity
• The lubrication conditions and maintenance
• The regular control of the compressed air filter, as well as the regular checking of the machine with regards
to external damages.
Inspection and maintenance can be done by the operator.
Disassembly and re-assembly of the machine have to be executed by qualified staff only. Incorrect assembly can
lead to danger of accident for the operator and to defects on the machine.
Additionally to the measures described before, it is a must to check the grease in the gear and to fill it up or
replace it, if necessary.
The correct quantity of grease (15g) is very important with regard to good lubrication and low warming.

SERVICE AND MAINTENANCE

31