Publicité
T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Lift the rear hatch door of
the vehicle and temporarily
remove the cargo net and cargo
cover. Additionally remove the
threshold trim plate (Fig. 1A).
3. Remove the interior trim
panel on the left (drivers) side
(Fig. 1B).
4. Locate the vehicles tail light wiring harness behind the
trim panel. It will have a green connector similar to that on
the T-Connector harness.
5. Plug the T-connector end into the tail light harness
connector, Secure the connectors together by sliding the
red locking tab into the locking position.
6. Confirm correct operation with a test light or by using a
trailer.
7. Re-install the interior trim panel, routing the T-
Connectors 4-flat trailer connector our under the panel.
8. Return the cargo net and cargo cover to their original
positions. Replace the threshold trim plate to its original
position using the fasteners removed in step 2.
B
A
Fig. 1
Publicité
