Simons Voss Technologies SREL2.COVER1 Guide Abrégé page 25

Anti-vandalism housing
ü
ü
ü
ü
1. Place the stainless steel plate on the wall.
2. Screw the stainless steel plate into position with a PH2 screwdriver.
3. Feed the cable through the SmartRelay base plate and connect the
4. Place the SmartRelay base plate on the stainless steel plate.
5. Screw the SmartRelay base plate into position firmly using an AF3
6. Place the SmartRelay cover on the base plate.
7. Close the SmartRelay cover.
8. Place the anti-vandalism housing cover on the stainless steel plate.
EN
SmartRelay opened.
PZ2 screwdriver at hand.
AF3 screwdriver at hand.
Secutorx 10 screwdriver at hand.
1
Use suitable dowels if necessary.
2
SmartRelay.
3
screwdriver.
4
5
6
7
4. Installation
25 / 64