peerless-AV SAX755PU Mode D'emploi page 11

• Portrait lock clips (E) must be securely installed to top and bottom rails against inside of adapter brackets (B).
Failure to place lock clips in correct location may cause injury.
Install four portrait lock clips (E) to top and bottom rails using four M5 x 13mm self tapping screws (H) and four fl at
6
washers (I) as shown in detail 2. Tighten using allen wrench (N). Portrait lock clips must fi t snug against inside of
adapter brackets (B) as shown in fi gure 6.1.
fi g. 6.1
REAR OF
DISPLAY
Optional Orientation Adjustment
Remove button socket head screw with round plate
7
as shown in detail 3.
DETAIL 3
BUTTON SOCKET HEAD SCREW
WARNING
E
B
BOTTOM RAIL
E
7-1
Rotate display clockwise 90°, then reinstall socket
head screw with round plate to lock down.
11 of 38
TOP RAIL
RAILS
E
DETAIL 2
FRONT OF
DISPLAY
ISSUED: 01-25-12 SHEET #: 095-9368-6 01-07-14
I
H
B