Press and hold
for 5 seconds.
Remote
Press and hold
for 5 seconds.
How To : Change "MTX iT1air" in the Airplay list.
You can change the unit wifi name if, for example, you have more than one iT1air in the same network.
1. Connect the iT1air to the wall outlet. Push "Power"
2. Press and hold "Wi-fi"
for 5 seconds. The LED#1 will flash Blue/Purple.
3. Take your computer, iPad, iPhone, iPod Touch or any Android tablet and look for the iT1 Wi-Fi network.
4. Join "MTX-iT1air-network".
5. Open a web browser and type 192.168.1.1 - You are now on the iT1air setting page.
6. Type the new desired name in the "AirPlay Device Name field.
7. Hit "Update". The unit will restart. It will be available in the Airplay devices list under the updated name.
How To : Reset the unit.
You can reset the volume and the subwoofer settings.
Press and hold for 5 seconds "Power"
How To : Reset the subwoofer level.
The subwoofer level is adjustable from -5dB to +10dB by 1dB steps.
If you want to go back to 0dB, just push (Sub-) and (Sub+) at the same time on the remote control.
Do not abuse the level of the subwoofers. Too much bass will affect sound quality and add distortion.
How To : Switch on the Wifi Direct mode.
If no Wifi network is available, the iT1air can generate his own wifi network for Airplay.
Press and hold for 5 seconds the Airplay control (on the Unit or on the Remote) will enable the Wifi Direct mode.
The name of the network (SSID) is « MTX iT1air» . The unit will turn into a router and you'll be able to stream from your
Airplay device directly to the unit without any external network.
How To : Install the Batteries in the Remote Control.
Before using the remote control, you must install two AAA batteries.
Remove the bottom panel with a 2mm HEX key. Follow the (+) and (-) signs located around the two springs.
How To : Stay Tuned.
https://www.facebook.com/MTXEurope
https://twitter.com/MTXEurope
http://www.mtxaudio.eu
to switch on the unit and wait 10 seconds for initialization.
on the unit or on the remote control.
AAA
AAA