Direct Mode; Subwoofer - MTX Audio iT1air Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
IR Remote Control Behavior.
Power On/Off
Reset
Source : AirPlay

Direct mode

Source :
Dock - USB
Source Select :
Aux (Jack)
Volume Up
Volume Down
Browse UP
OK
Browse Down
Skip Backward
Browse Left
Skip Forward
Browse Right
Play / Pause
Browse Back / Menu

Subwoofer

Volume Up
Subwoofer
Volume Down
• A single push will power On or power Off the iT1air. When the unit is Off, the two LEDs will be Off.
When the Unit in On, the two LEDs are on. LEDs colors depend on the input and wifi settings.
• A single push will enable Airplay Input - The LED#2 will turn to solid Blue.
• Press and hold for 5 seconds will enable the Direct Wi-Fi mode and you'll be able to stream from your computer, from
iTunes or from your Airplay device directly to the unit without any external network. The iT1air will create the network.
• First push will enable Dock input - The LED#2 will turn to solid Red.
• Second push will enable USB input - The LED#2 will turn to solid Green.
• Single push will enable the Aux Analogue 3,5mm jack input - The The LED#2 will turn to solid Purple.
• Single push will increase the volume one step - The LED#1 will flash red twice.
• Press and hold will increase the volume gradually - The LED#1 will flash red continuously.
• Single push will decrease the volume one step - The LED#1 will flash red twice.
• Press and hold will decrease volume gradually - The LED#1 will flash red continuously.
• Airplay, Dock & USB : Single press will navigate to the top -
• Airplay, Dock & USB : OK/validation -
• Airplay, Dock & USB : Single
push
• Single
push
: Skips to the next track on the iDevice or in iTunes - the LED#1 will flash red twice.
• Press & hold : Fast backward in the current track - the LED#1 will flash red continuously.
• AirPlay, Dock & USB : Browse the iDevice : move to the left - the LED#1 will flash red twice.
• Single
push
: Skips to the next track in the iDevice or in iTunes - the LED#1 will flash red twice.
• Press & hold : Fast forward in the current track - the LED#1 will flash red continuously.
• AirPlay, Dock & USB : Browse the iDevice : move to the right - the LED#1 will flash red twice.
AirPlay, Dock & USB : Play/Pause - The LED#1 will flash red twice.
AirPlay & USB -> Browse back the iDevice. It is the same behavior as Apple's «Menu» - the LED#1 will flash red twice.
• Single
push
: increase the subwoofer volume one step - the LED#1 will flash once.
• Press and hold increase the subwoofer volume gradually - the LED#1 will flash fast.
• Single
push
: Decrease the subwoofer volume one step - the LED#1 will flash red once.
• Press and hold decrease the subwoofer volume gradually - the LED#1 will flash red fast.
The LED#1 will flash red twice.
The LED#1 will flash red twice.
will navigate to the bottom.
The LED#1 will flash red twice.

Publicité

Table des Matières
loading

Table des Matières