MTX Audio iT1air Mode D'emploi page 6

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
How To : Connect to the network for Airplay #1 : 5 sec...
1. Connect the iT1air to the wall outlet. Push "Power"
to switch on the unit and wait 10 seconds for initialization.
2. Take your iPhone, iPad or iPod Touch and verify it is connected to the Wi-Fi network.
3. Connect your device to the Dock (LED#2 red) or to the USB (LED#2 green).
4. Push
once. The unit will display a message on your iDevice asking if you want to share your Wi-Fi settings with the iT1air.
Accept. The iT1air is now available in the Wi-Fi network. The LED#1 will illuminate solid Blue. You can disconnect your device now.
5. Open a computer or you iDevice and in the Airplay devices list, choose "MTX iT1air".
How To : Connect to the network for Airplay #2 : Geek...
1. Connect the iT1air to the wall outlet. Push
to switch on the unit and wait 10 seconds for initialization.
2. Press and hold
(Wifi control) for 5 seconds. The LED#1 will flash Blue/Purple.
3. Take your computer, your iPad, your iPhone, your iPod touch or any Android tablet and look for the iT1 wifi network.
4. Join the network named "MTX iT1air".
5. Open a web browser and type 192.168.1.1 - You are now on the iT1air setting page (see picture below).
6. Choose your network in the list and type your password.
Note : at the bottom of the Wifi networks list, you can configure it manually, if the network is hidden for example.
7. Hit "Apply". The unit will restart and join the chosen network.
8. Open a computer or your iDevice. In the Airplay devices list, choose the "MTX iT1air". Hit play... Music...

Publicité

Table des Matières
loading

Table des Matières