Use Of The Electric Oven - Amsta AMCG60BM Notice D'utilisation

Size of the container and dimension of the gas flame should comply with each other.
Adjust the gas flame in such a way that it will not protrude from the container base. Put
the container on the pot carrier by centering.
Gas cut-off safety assembly (for versions with thermal element)

Use of the electric oven

Operation of the electronic oven is selected by use of the function switch.
Temperature is set by the temperature switch. All oven functions are switched off by
bringing the respective switch to the off (upper) position.
1. Set the oven timer to the cooking time; see Use of the oven timer.
2. Bring the temperature switch to the desired operating mode.
Bring the function switch to the desired operating mode
3.
<<The oven heats up to the set temperature and maintains it. Temperature light is on
during the heating process.>>
Switching the electric oven off
Bring the furnace timer to off position.
In case the timer is set to a certain time, the timer will automatically
switch off; see. Use of the furnace timer
« The furnace is heated up to the set temperature and maintains it . Temperature light is on
during heating.».
If the hob burners have thermal
element, safety mechanism is activated
and cuts off the gas immediately against
turning off resulting from liquid
overflown.
.
16
High flame.
Low flame.
Low fl ame .
.