Safety Instructions - VOLTCRAFT VC-WL 60/200 Mode D'emploi

Operating Instructions
VC-WL 60/200
Battery Charger / Engine Starter
Item no: 2472503
1 Intended use
The product is a battery charger and engine starter that is compatible with various battery types (e.g.,
STD, GEL, AGM).
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to
third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
2 Delivery contents
■
Product
■
1x trolley handle
■
4x handle screws
■
1x trolley stand
■
4x stand screws
■
1x wheel axle
3 Latest product information
Download the latest product information at www.conrad.com/downloads
low the instructions on the website.
4 Description of symbols
The following symbols are on the product/appliance or are used in the text:
The symbol warns of hazards that can lead to personal injury.
The symbol warns of dangerous voltage that can lead to personal injury by electric shock.
This product must only be used in dry, enclosed indoor areas. It must not become damp or
wet, as this may cause a fatal electric shock!
For safe and proper use, follow these instructions. Keep them for future reference.
Fuse location

5 Safety instructions

Read the operating instructions carefully and especially observe the safety informa-
tion. If you do not follow the safety instructions and information on proper handling,
we assume no liability for any resulting personal injury or damage to property. Such
cases will invalidate the warranty/guarantee.
5.1 Read first!
■
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the haz-
ards involved.
■
Children shall not play with the appliance.
■
Cleaning and user maintenance shall not be made by chil-
dren without supervision.
■
WARNING Never recharge non-rechargeable batteries.
5.2 General
■
The product is not a toy. Keep it out of the reach of children and pets.
■
Do not leave packaging material lying around carelessly. This may become dangerous playing mater-
ial for children.
■
If you have questions which remain unanswered by this information product, contact our technical
support service or other technical personnel.
■
Maintenance, modifications and repairs must only be completed by a technician or an authorised re-
pair centre.
5.3 Handling
■
Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
4
■
2x wheel bearing hub washer
■
2x c-clips (for axle)
■
2x wheels
■
2x wheel hub caps
■
2x 80A (bolt on OTO strip) fuses
■
Operating instructions
or scan the QR code shown. Fol-
5.4 Operating environment
■
Do not place the product under any mechanical stress.
■
Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
■
Protect the product from high humidity and moisture.
■
Protect the product from direct sunlight.
■
Do not switch the product on after it has been taken from a cold to a warm environment. The con-
densation that forms might destroy the product. Allow the product to reach room temperature before
you use it.
5.5 Operation
■
Consult an expert when in doubt about the operation, safety or connection of the product.
■
If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guar-
anteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.6 Mains cable
Do not modify or repair mains supply components including mains plugs, mains cables, and
power supplies. Do not use damaged components. Risk of death by electric shock!
■
The mains outlet must be located near to the device and be easily accessible.
■
Never plug in or unplug the mains plug when your hands are wet.
■
Never pull the mains plug from the socket by pulling at the cable. Always pull it from the mains socket
using the intended grips.
■
Unplug the mains plug from the mains socket if you do not use the device for an extended period of
time.
■
Disconnect the mains plug from the mains socket in thunderstorms for reasons of safety.
■
Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mech-
anical stress.
■
Avoid excessive thermal stress on the mains cable from extreme heat or cold.
■
Do not modify the mains cable. Otherwise the mains cable may be damaged. A damaged mains
cable can cause a deadly electric shock.
■
Do not touch the mains cable if it is damaged.
– First, power down the respective mains socket (e.g. via the respective circuit breaker) and then
carefully pull the mains plug from the mains socket.
– Never use the product if the mains cable is damaged.
■
A damaged mains cable may only be replaced by the manufacturer, a workshop commissioned by the
manufacturer or a similarly qualified person, so as to prevent any danger.
■
Ensure that cables are not pinched, kinked or damaged by sharp edges.
■
Always lay cables so that nobody can trip over or become entangled in them. This poses a risk of in-
jury.
5.7 Connected devices
■
Also observe the safety and operating instructions of any other devices which are connected to the
product.
5.8 Product
WARNING: Explosive gases. Prevent flames and sparks. Provide adequate ventilation dur-
ing charging.
WARNING: Never recharge non-rechargeable batteries.
WARNING: Risk of electric shock. Disconnect the product from the power supply before con-
necting or disconnecting leads to the battery.
WARNING: Always wear eye protection and protective clothing when working around batter-
ies.
■
Do not short circuit the leads.
■
People with pacemakers should consult a doctor before use. Electromagnetic fields in proximity can
cause pacemaker interference and/or failure.
■
Always switch the vehicle engine and electrics OFF before connecting the product.
■
Make sure the vehicle is properly secured (e.g., car parking brake is engaged, boat is securely
moored).
■
Risk of electric shock! Never use the product with wet hands.
■
Risk of burns! Engines compartments can become dangerously hot after use. Always allow to cool to
room temperature before connecting the product.
5.9 Working with rechargeable batteries
■
Risk of electric shock! Never use the product with wet hands.
■
Risk of electric shock! Check the insulation layer of the battery clamps is in normal condition (no dam-
age, bareness, or disconnection).
■
Avoid creating sparks by connecting battery leads in the correct order. Sparking can damage the
vehicle electrical system and/or ignite flammable substances.
■
Before charging, the electrolyte (battery acid) must be filled to the maximum marked levels. Never
use tap water. Distilled water must be used.
■
Never attempt to recharge frozen or damaged batteries.
■
When working around vehicles and batteries, be aware that loose hair, clothing, and jewellery (e.g.,
rings, bracelets, necklaces, and watches) can get trapped and/or conduct electricity and cause elec-
tric shock or burns.
■
Keep battery contact terminals clean. Contamination can lead to incorrect measurement results due
to poor conductivity.
6 Assembly
6.1 Assemble handle
Assemble parts as shown.