noken SMART PLUS PROGRAM Mode D'emploi page 23

Summary table of the "On/Stand-by" LED statuses:
Green
Red
Amber
Summary table of the "Mode" LED statuses:
Comfort
Night
Antifreeze
ECO
Boost 2h
Fil-Pilote
NOTES:
1) In case of interruption of the power supply, the thermostat returns to the previous operating mode with the
exception of "Boost 2h" and "Chrono" modes. The state of the thermostat is saved few seconds after a function is
activated.
2) The device will beep to confirm the reception of a signal from the remote control.
3) The device could fail in detecting an opened window e.g. if the thermostat is located on an isolated area of the
room and far from air currents or if the thermostat is placed close to an external heating source, or if the tempera-
ture variation in the room is too slow.
4) "Mode" LED blinking amber: Indicates that the probe is defect; the device is deactivated.
Repairs carried out by unauthorized personnel invalidate warranty
The manufacturer reserves the right to make any changes to the product described in this manual, at any time, and
without prior warning.
DISPOSAL
This product may not be treated as ordinary household waste. It has to be disposed in proper waste
collection sites. In case of replacement it shall be returned to the distributor.
Such an end-of-life treatment of the product will preserve the environment and will reduce consump-
tion of natural resources.
This symbol applied to the present product indicates the obligation to bring it to a proper waste co-
llection site, in order to let it be disposed according to 2002/96 / CE (RAEE - WEEE) directives.
The device is in stand-by mode
The device is active
The device is in "Chrono" mode
Red
Green
Blinking green
Ambar
Blinking red
The colour depends by the operating mode configured by the remote Fil-Pilote
control unit (according to the previous list).
ENG
23