noken SMART PLUS PROGRAM Mode D'emploi page 22

ENG
Fil-Pilote Mode (only for models equipped with "Fil-Pilote" feature)
In this mode the device is managed by a remote control unit.
1.Press the [Mode] key until the corresponding icon is shown on the display. 2.Use the [+] and [-] buttons to select the desired temperature.
The remote Fil-Pilote control unit will configure the operational mode. The device operates with the most advanced "Fil-Pilote" system with six commands, which
allows the following functions
1. Stand-by: power off the heating element, the device remains active.
2. Comfort: maintains the "Comfort" temperature set by the user.
3. Eco: maintains the room temperature 3,5°C below the "Comfort" temperature.
4. Antifreeze: maintains the room temperature at 7°C.
5. Comfort-1: maintains the room temperature 1°C below the "Comfort" temperature.
6. Comfort-2: maintains the room temperature 2°C below the "Comfort" temperature.
NOTE: When this operating mode is activated on models not equipped with the "Fil-Pilote" feature, the device will operate in "Comfort" mode.
Key lock
This function allows locking the buttons of the device to avoid inadvertent modifications of the settings.
All the keys are disabled except the [On/Stand-by] button.
Press together the [Mode] and [+] keys for 3 seconds to activate this mode. To unlock the buttons repeat the procedure.
ECO Mode
In this mode the selected temperature is reduced of 3°C, independently by the other device settings. This function allows reducing the energy consumption.
To activate/deactivate the "ECO" mode, press the corresponding [ECO] key. In "ECO" mode, the "Mode" LED turns amber.
OPEN WINDOW DETECTION FUNCTION
Press together the [ECO] and [-] keys for more than 3 seconds to activate the "Open Window Detection" function. To deactivate the function repeat the procedu-
re.
The "Open Window Detection" function enables detecting of an open window by sensing a sudden decrease of the temperature in the room. In such a case, the
device deactivates the heating element for a maximum of 30 minutes or until an increase of the room temperature reveals that the window has been closed. At
the end the device returns to the previous operating mode.
22