Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1. Screw knob
2. Upper carrying handle
3. Ram stroke control lever
4. Splitter column
5. Lower carrying handle
6. Operation handle
7. Motor
8. Main body column
9. Oil input plug
10. Wheel
11. Working table
12. Basement
13. Lock plate for working table
14. Cutter
15. Handle guard
16. Log catching claw.
17. Switch
18. Oil pipe (inside the housing)
19. Oil tank
20. Wheel axes.
21. Protective arches
2. Size of the logs to be split
The log size may be three heights- 580 mm,
770 mm and 1060 mm during adjusting table
board.
The figure shows the maximum log sizes that
can be split.
The diameter of the log is indicative: a small
log can be difficult to split if it has knots or a
particularly tough fiber. On the other hand, if
the wood has regular fibers it is not difficult to
split logs with diameter greater than the
maximum shown. It is important not to insist
when the log does not split on the first
attempt, as the pump may be damaged by
the overheating of the oil when the
machine is made to work under the
maximum stress in the attempt to split
excessively hard wood.
3. Recommended oils
We recommend use of the following oils for
the hydraulic cylinder.
SHELL TELLUS T22
ARAL VITAM GF22
SP ENERGOL HCP22
8
Publicité
Table des Matières
