Aliaxis Nicoll WBS1PMU Notice De Pose page 27

FITTING THE TILLING
INSTALLATION WITH OPERATING PLATE
INSTALLATION WITH PUSH BUTTON FIREWALL CONTROL BUTTON REF.:
WBCCFB / WBCCFC / WBCCFS
Don't forget to plan an
!
access hatch in case of any
maintenance operations.
The tiling thickness must NOT exceed 62 mm or 117 mm if you are using the
extension.
If implementation in hollow wall, don't forget to add shim.
Install the polystyrene template.
!
Place tiling flush with template.
The tiling thickness must NOT exceed
70 mm.
If implementation in hollow wall, don't
forget to add shim.
Plan a 75 mm diameter hole to
install the push button.
Ø 75 mm
680 mm
27