Fixing The Frame & Connecting The Drain - Aliaxis Nicoll WBS1PMU Notice De Pose

INSTALLING THE SUPPORT FRAME
FIXING THE FRAME AND CONNECTING THE DRAIN
Adjust the connector by cutting the
straight section, if necessary.
An adapator pipe sleeve to fit the piping
!
may be necessary (not supplied).
Install the frame in its final position to
validate the adjustments and mark where
the holes are to be drilled.
Drill, glue the pipe and permanently fasten
the frame.
10 mm diametre drilled holes
24
WBS1PMU:
Orientable PVC pipe conector
10 mm diametre drilled holes