Renfert POWER steamer 1 Guide De Démarrage Rapide page 13

Service life
The maximum service life strongly depends on the conditions of use, in particular on compliance with the
prescribed cleaning and maintenance intervals.
Authorized persons
Operation and maintenance of the equipment may only be performed by trained personnel.
Unauthorized persons, in particular children, are not permitted to use this equipment.
Any repairs not described in these operating instructions may only be performed by a qualified electrician.
Product description
Assemblies and functional elements
See Fig. 1 (on inside cover)
1 Tank cap
2 Model tray
3 ON / OFF button
4 "Tank empty" indicator (red)
5 "Heating / Ready for operation" indicator
(orange / green)
6 "Calcification state" indicator (yellow)
7 Handpiece
8
Steam button
9 Handpiece holder
Scope of delivery
1 Steam cleaning unit
1 Tank cap
1 Quick Start Guide
1 Service cap tool
1 Cleaning brush
1 Sealing set
1 Water hose (POWER steamer 2 only)
Test strips for determining the water hardness and rinsing intervals
Startup
Unpacking
⇒ Check the delivery for completeness (compare with the scope of delivery).
Do not lift the unit using parts that extend outwards, such as the handpiece holder, for example.
⇒ Remove the shipping restraint.
⇒ Screw in the tank cap (1).
Setup
⇒ Place the unit on a stable, level work table.
⇒ Do not cover the ventilation slots on the back of the unit.
⇒ To the rear, ensure that there is at least 5 cm of space to the wall.
⇒ Place the unit so that the power plug can be accessed easily.
The outlet opening of the overpressure valve (14) must not be closed or blocked in any way.
10 ---
11 Manometer (POWER steamer 2 only)
12 Service flap
13 Service cap
14 Overpressure valve - outlet opening
15 Power cord
16 Water connection (POWER steamer 2 only)
17 Service cap tool
18 Water hose (POWER steamer 2 only)
- 3 -
en