Harbor Breeze 80210 Mode D'emploi page 18

E3
Remove the strain relief bracket screw.
E5
Insert the strain relief bracket's dog-leg tab so that it
hooks over the lip of the motor. Reinstall the strain
relief bracket screw.
E7
Attach thumbscrews.
WARNING: To reduce the risk of electrical shock,
all 4 thumbscrews MUST be properly installed.
K
M
18
43033-01 01/24/2008
E4
position the strain relief bracket under the motor as
E6
Align posts A, B, C and D (stamped into motor housing)
with posts A, B, C and D (stamped into light fixture).
Slide light fixture over posts.
E8
Install 2 Max 60 Watt A15 bulbs (Not Included).
J
shown.