Functions - Alecto PAS-212ALED Mode D'emploi

1. Media player with Bluetooth
2. SD card slot for SD card (max. 16G).
3. MP3 player display.
4. USB port (USB 2.0).
5. MP3 player console.
6. Input for microphone signals with XLR input or 6.3 mm stereo jack (symmetrical or
balanced) with volume control.
7. Input for line signals with XLR input (symmetrical), 3.5mm stereo jack or cinch stereo
input with volume control.
8. Treble and bass control.
9. Output with Speakon plug for additional passive speaker. A minimum impedance of
8Ω (e.g. PAS-21XPLED).
10. Power LED. Power indication.
11. CLIP LED. Illuminates at maximum power output.
12. Line output XLR (symmetrical) to another amplifier.
13. Media VOLUME: volume control for the Media player.
14. Cooling element of the amplifier, keep unobstructed, may become hot.
15. Light switch for on or off LEDS.
16. Fuse holder with F5A glass fuse.
17. 230V mains power input.
18. Power switch.
19. Speaker connection.
GENERAL:
• Check that the mains voltage selection (to the right of the mains switch) is 230V.
This can be changed if 115V is available.
• Carefully read the user's manual and follow all directions.
• Before cleaning the speaker, always remove the mains cable from the wall socket
and switch off the speaker.
• Clean the cabinet with a slightly moist cloth.
• Never place or use the set in wet or humid space or environment.
• Ensure adequate heat dissipation; never cover the set nor place it directly next to a
heat source.
• Prevent any damage to the mains cable and make sure the cable causes no risk of
tripping or falling.
• Never disassemble the set; this may only be performed by qualified personnel.
• Only turn on the speaker after setting all volume controls to MINIMUM (0), to avoid
possible scares when switching on.
• Prolonged listening to high volume levels can cause hearing damage.

FUNCTIONS

function.
®
WARNING / MAINTENANCE
30