Basic Osd Setup - Bticino 391415 Guide D'instructions Rapide

391 415 - 391 416

BASIC OSD SETUP

1. OSD setup under VGA input mode
(a). Press MENU button to access Main Menu setting interface
(b). Press Λ and V to select the desired submenu, total four sub-menus.
(c). Press MENU again to enter the submenu
(d). Use < and > to adjust the parameter value.
(e). Press EXIT to exit the setup or return to previous interface.
*Note: the setting interface only available when connected with computer
Item interface
Item interface
1. Enter Main Menu interface by pressing once MENU button.
2. Press Λ and V to select the desired option, total four
options.
3. Press MENU again to enter sub-menu
4. Select "Exit" to exit.
1. Enter "Color" setup interface in the main menu.
2. Press Λ and V to select the desired option and then Press
MENU to enter this item.
3. Adjust parameter of the correspondent options to the desired
value by pressing < and >.
4. Select "Exit" to exit current oper.
Remark
Remark
38