Safety Information; Accessories; Installation - Bticino 391415 Guide D'instructions Rapide

SAFETY INFORMATION

Please read the below notes before use the monitor set and keep it well for future reference.
(a) Use only a power source and connection appropriate for the MONITOR set as indicated on the marking label.
(b) Slots and openings in the cabinet are provided for ventilation; these openings must not be blocked or covered.
Never push objects of any kind into cabinet slots or other openings.
(c) Never insert anything metallic into the MONITOR set openings.
Doing so may create a danger of electric shock.
(d) To avoid electric shock, never touch the inside of the MONITOR set.
Only a qualified technician should open the MONITOR set's case.
(e) Unplug the MONITOR set from the wall outlet before cleaning.
Do not use liquid cleaner or aerosol cleaners.
Use a damp, lint free cloth for cleaning.
(f ) Install the MONITOR set near an outlet that you can reach easily.
Disconnect the product by grasping the plug firmly and pulling in from the outlet.
Never disconnect it by pulling the cord.

ACCESSORIES

Please check the following listed accessories before installation:
AC wire .............................................................one pcs
AC adapter ...........................................................one set
VGA cable .............................................................one pcs
AUDIO cable ........................................................one pcs

INSTALLATION

No tools are required to install the unit. Simply follow the instructions outlined in the next few pages.
1. Rear Interface
(1) DC 12V: Connect female end of the power cord to the Power Adapter.
Connect the Power Adaptor to the MONITOR set.
(2) VGA : Plug the D-type15 pin VGA interface into the VGA video Interface of the PC,
and the other end into DB15 VGA inlet of the LCD monitor.Fasten the screw.
(3) S-Video In: connecting with Video source.
(4) BNC IN: BNC input signal
(5) BNC OUT: BNC output signal
(6) AUDIO IN/OUT : PC audio in-L/R inlet
Congratulations! You have finished setting up you MONITOR set!
All you have to do now is Press the "POWER" button.
fig.1
35