Natural Gas Conversion - Nexgrill DELUXE dual energy Guide Du Propriétaire

This conversion kit shall be installed by a qualified service agency in accordance with
the manufacturer's instructions and all applicable codes and requirements of the
authority having jurisdiction. If the information in these instructions is not followed
exactly, a fire, explosion or production of carbon monoxide may result causing
property damage, personal injury or loss of life. The qualified service agency is
responsible for the proper installation of this kit. The installation is not proper and
complete until the operation of the converted appliance is checked as specified in the
manufacturer's instructions supplied with the kit.
Orifice Chart
The different burner valves in this grill have different BTU ratings. This means that the amount of gas coming from each orifice
varies in order to create the BTU's. The holes in the orifices themselves are drilled to different sizes so as to allow the proper
amount of gas to flow through them. Please note the chart below as an easy reference for the various orifice opening sizes for
the different valves in the grill.
Components
Main Burner
Side Burner
Below parts are needed for natural gas conversion:
INCLUDED
•
Natural gas orifices
Natural gas conversion kit Part Number 710-0003
(NOT INCLUDED)
•
Quick Connector
•
3.04 m / 10 ft Natural Gas Hose
• 4" Water Column Regulator with Hose
•
Tools
•
6 mm Nut Driver
•
6 mm Wrench
•
Hex Key
House
Supply Line
720-0898A (LP), 730-0898A (NG) orifice sizes
Liquid Propane (LP)
Orifice Size
0.94 mm
1.02 mm
3.0 m NG
Hose
Quick Connector
WARNING
BTU/HR
10,000
12,000
Tools that will be needed for conversion:
4" WC
Regulator
with Hose
11

Natural Gas Conversion

Natural Gas (NG)
Orifice Size
1.54 mm
1.70 mm
6mm
Gas Grill
Connection
BTU/HR
10,000
12,000