Unmount The Bodyspray Before Installation - Jacob Delafon E8002 Notice Technique

• Thread the nipple into the tee/elbow and hand tighten.
• Measure the distance from the end of the nipple to the surface of the finished
wall. Verify that the distance is at least 1-1/2" (3.8 cm) and no more than 1-3/4"
(4.4 cm).
• Remove the nipple.
• Apply thread sealant to the threads of the nipple.
• Reinstall the nipple to the tee/elbow.
• Run water through the system to flush out any dirt or debris.

6. Unmount the bodyspray before installation

➂
WARNING :
➀
Clockwise
➁
➃
English
18