Panasonic LUMIX DC-GH5M2 Manuel D'utilisation page 26

Getting Started / Basic Operations
A
1
Set the camera on/off switch to [OFF].
2
Insert the battery into the camera.
3
Connect the camera USB port and the AC adaptor using
the USB connection cable.
• Check the direction of the terminals and plug in/out straight holding onto the
plug.
(Inserting these at an angle may cause deformation or malfunction)
4
Connect the AC adaptor to an electrical outlet.
• The charging light
Charging Light Indications
• Even when the camera on/off switch is set to [OFF] thus turning the camera off,
it consumes power.
When the camera will not be used for a long time, remove the power plug from
the electrical outlet in order to save power.
26
DVQX2187 (ENG)
A
turns red and charging begins.
Charging light (red)
On: Charging.
Off: Charging has completed.
Blinking: Charging error.