1.888.610.7664
Technical Data
Digital Anglefinder
Article number
"HOLD" function
Display Illumination
"Simple Miter" Operating Mode
"Compound Miter" Operating
Mode
Measuring range
Measuring accuracy angle
Lowest indication unit
Operating temperature
14 °F...122 °F / –10 °C...+50 °C
Storage temperature
–4 °F...158 °F / –20 °C...+70 °C
Alkaline Batteries
Operating time approx.
Automatic switch-off after
approx.
Leg length
Weight according to EPTA-
Procedure 01/2003
Dimensions
(length x width x height)
IP 54 (dust and splash proof)
The anglefinder can be clearly identified with the serial
number 10 on the type plate.
Intended Use
The anglefinder is intended for measuring and transfer-
ring angles and for calculating simple and compound mi-
ter angles. It is suitable for indoor and outdoor use.
Features
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
1 Fold-out leg
10 Serial number
2 Viewing window for dis-
11 "HOLD" button
play
12 "ON/OFF" button
3 Locking knob
13 Button for rotating the
4 Base leg
5 Battery lid
14 "MTR1" button for sim-
6 Latch of battery lid
15 "MTR2"
7 Display
8 Spirit level for horizon-
16 Protective pouch
tal alignment
17 Leg extension
9 Spirit level for vertical
alignment
Display elements
The numbering of the product features shown refers to
the illustration of the anglefinder on the graphic page.
a "H" indicator for "HOLD" memory value
b Battery indicator
c Reading
d Bevel angle indicator "BVL"
e Miter angle indicator "MTR"
f
Corner angle indicator "CNR"
g Spring angle indicator "SPR"
www.calcert.com
15
10
20
5
25
0
30
6
GAM 220 MF
3 601 K76 610
●
●
●
●
0°...220°
±0.1°
0.1°
4 x1.5V LR6 (AA)
80 h
30 min
15.75in / 400 mm
2.4 lbs / 1.1 kg
17.6 x 2 x 2.4 in /
447 x 52 x 60 mm
●
display
ple miter
button
for
compound miter
sales@calcert.com