Cleaning And Care - Bort BDR-1200 Mode D'emploi

– before maintenance .
Child safety lock
This product is equipped with a child safety lock 4:
Activate
(position: locked lock)
Deactivate
(position: open lock)
Steaming
WARNING! The product has to be maintained
in an upright position
– while being used,
– under pressure or
– filled with water .
Hold the product by its handle 6 .
NOTES:
• Controlling the steam output: Gradually press the
steam trigger 5 .
• Stop steaming when the steam indicator 17 goes off .
Wait until the steam indicator 17 lights up again . You may
now resume with the work .
• If there is no steam output – although the steam in-
dicator 17 is on: Disconnect the power plug 7 from the
mains socket . Refill the water tank 2 .

CLEANING AND CARE

Cleaning the main unit
DANGER! Risk of electric shock! Before clean-
ing and maintenance: Disconnect the power
plug 7 from the mains socket .
WARNING! Do not immerse the product's
electrical components in water or other liq-
uids .
Never hold the product under running water . Wipe down
the product with a slightly damp cloth .
Do not let any water or other liquids enter the product
interior .
Do not use any abrasive, aggressive cleaners or hard
brushes to clean the product .
After cleaning: Let all parts dry completely .
Cleaning the accessories
- Clean the accessories in warm, soapy water .
- After cleaning: Let all accessories dry completely .
Fully push in the symbol of
the child safety lock 4 . The
steam trigger 5 can now no
longer be pressed down .
Fully push in the symbol of
the child safety lock 4 . The
steam trigger 5 can now be
used again .
Cleaning the cotton cover 10
The cotton cover 10 can be hand-washed in water with
temperature up to 60 °C .
After cleaning: Let the cotton cover 10 dry completely .
You may also use a tumble dryer at a low level (55 °C) .
Removing limescale
If the steam power reduces drastically, it may be needed
to remove the limescale from the water tank 2 /accesso-
ries:
Water tank 2 :
• Disconnect the power plug 7 from the mains socket .
• Fill the water tank 2 with a mixture of tap water and
vinegar (ratio of 2:1) .
• Wait 24 hours .
• Drain the mixture into a sink .
• Flush the water tank 2 with fresh water (see "Filling
the water tank") .
Accessories:
• Disconnect the power plug 7 from the mains
• socket .
• Fill the water tank 2 with a mixture of tap water and
vinegar (ratio of 2:1) . Install the accessory you wish to re-
move the limescale from .
• Secure the position of the product to ensure that the
steam is aimed away from the surrounding objects and
surfaces .
• Turn on the product . Operate the product until all the
mixture is used up .
Storage
Store the product in the original packaging when it is not
in use .
Store the product at a dry location out of the reach of
children .
Store the product with an emptied water tank 2 only .
WARRANTY
The product has been manufactured to strict quality
guidelines and meticulously examined before delivery .
In the event of product defects you have legal rights
against the retailer of this product . Your legal rights are
not limited in any way by our warranty detailed below .
The warranty for this product is 3 years from the date of
purchase . Should this product show any fault in materi-
als or manufacture within 3 years from the date of pur-
chase, we will repair or replace it – at our choice – free of
charge to you . The warranty period begins on the date
of purchase . Please keep the original sales receipt in a
safe location . This document is required as your proof
of purchase . This warranty becomes void if the product
has been damaged, or used or maintained improperly .
The warranty applies to defects in material or manufac-
ture . This warranty does not cover product parts subject
13