Cleaning And Storage; Turning On/Off - Bort BDR-1200 Mode D'emploi

between 50 and 60 Hz . The product adapts itself for both
50 and 60 Hz .

CLEANING AND STORAGE

• Always turn off the product before disconnecting it
from the power supply .
• Do not pull the power plug out of the electrical outlet
by the power cord . Do not wrap the power cord around
the product .
• Protect the product, its power cord and power plug
against dust, direct sunlight, dripping and splashing wa-
ter .
• Store the product in a cool, dry place, protected from
moisture and out of the reach of children .
• Protect the product against heat . Do not place the
product close to open flames or heat sources such as
stoves or heating appliances .
Before first use
Remove all packaging materials . Check if all parts are
complete .
ACCESSORIES AND AREAS OF APPLICATION
Accessory
Puller (8)
Upholstery nozzle (9)
Cotton cover (10)
Extension hose (12)
Angle nozzle (14)
Extension nozzle (15)
Round brush (16)
ASSEMBLY
Accessory
Puller (8)
Function
For cleaning windows,
mirrors, and other smooth
surfaces .
Move the puller from top to
bottom .
To disperse the flow of
steam over a wider area for
more gentle cleaning .
Designed to absorb excess
moisture . The cotton cover
also helps to prevent
water spotting . This allows
an effective steaming of
fabrics and upholstery .
Useful for hard-to-reach
areas .
For precision cleaning of
items with hard-to-reach
areas (faucets, sinks, etc .) .
Useful for hard-to-reach
areas .
For scrubbing especially
tough stains . Ideal to use
on ceramic tile, grouting,
and other similar surfaces .
Assembly
Fit the hooks (at the back of
the puller 8 ) into the slots
of the upholstery nozzle 9 .
Press the puller 8 against
the upholstery nozzle 9
until locked .
Upholstery nozzle (9)
Extension hose (12)
Extension nozzle (15)
Хлопковый чехол (10)
Angle nozzle (14)
Round brush (16)
Dismount all the accessories in a reverse order .
Operation
Filling the water tank
DANGER! Risk of electric shock! Before filling
the water tank 2 : Disconnect the power plug 7
from the mains socket .
CAUTION! Fill the water tank 2 with tap water
or distilled water without any additives .
If your tap water is hard: Use distilled water . If your tap
water is moderately hard: Mix distilled water and tap wa-
ter (ratio of 1:1) .
NOTES:
As long as there are steam and pressure in the water tank
2 you cannot open the safety valve 3 . To open the water
tank:
– Release steam or
– wait until the product has cooled down .
Do not exceed the water tank's 2 maximum fill capacity
of 250 ml .
Slowly open the safety valve 3 . Before fully opening, wait
a few seconds until the steam stops hissing .
Use the measuring cup 13 and the funnel 11 to fill the
water tank 2 through the water inlet 2 . Close the safety
valve 3 .

TURNING ON/OFF

• Connect the power plug 7 to a suitable mains socket .
The power indicator 18 lights up . The product starts to
produce steam immediately .
• The product is ready to use when the steam indicator
17 lights up .
• Turning off the product: Disconnect the product from
the mains socket .
NOTES:
The product takes around 3 minutes to preheat . The
product has to be unplugged
– after use,
– before cleaning, and
12
Attach the intake to the
steam outlet 1 of the
product/extension hose 12 .
Screw in a clockwise
direction until tight .
Fix on the upholstery
nozzle 9 .
Attach the intake to the
steam outlet 1 of the
product, extension hose 12
or extension nozzle 15 .