Using The Appliance - Bimar Vela HP102 Notice D'instructions

• Before each use, check that the appliance is in good condition and that
the power cord is not damaged: if in doubt consult a qualified
professional.
• Ensure that the power cord is correctly positioned and does not come
into contact with hot parts or sharp edges, or become wound around
the appliance itself and is not twisted.
• Do not hang or even lean the appliance against any walls.
• Place the fan heater far from any other source of heat, from flammable
material (curtains, tapestries, etc.), from flammable gases or explosive
objects (spray cans) and from materials that can be deformed by heat.
Make sure there is 120 cm of free space in front of the fan heater and
50cm free space on both sides and behind it.
• The surface where the appliance is used must be stable, spacious (do
not use on shelves or steps), level (since the appliance could tip over)
and heat resistant.

USING THE APPLIANCE

First use
Warning: run the appliance to eliminate the "new smell" and any oil
residue from the manufacturing process for at least 10/15 minutes.
During this operation, ventilate the room well to eliminate the "new
smell" that is given off by the appliance.
The fan-heater is fitted with switch sets following functions:
"0"= OFF; "
(1500W) + adjustable thermostat.
To use the fan heater, please follow the instructions below:
1) Insert the plug in the current socket.
2) To switch the appliance on, turn the knob anti-clockwise to the
position corresponding to the desired function.
3) The light turns on and turns off when the appliance reaches the
requested temperature; if the thermostat is set at the maximum
level, the appliance works continuously.
4) If you wish the oscillation function, press the oscillation button "
", and oscillation (rotation alternatively right and left).
5) The base has an anti-tipping switch which allows the heating fan to
function only when it is positioned correctly (when it is put in place,
you will hear a "click") but it stops the appliance if it tips.
6) To switch off the appliance, switch off the resistance completely,
let only the fan run for about 3 minutes (pos.
resistance (this way it will last longer), then switch off the fan by
"= fan; " "= air warm (800W); "
15
"= air very hot
) to cool the