Dogtra RB1000 Serie Notice D'utilisation page 30

"Point" Button
The Point button is below the Run/Point button on the
front of the transmitter. The unit will not beep while
the dog is moving in case the Point button is pressed
(you can use the Locate mode for locating your dog);
however when the dog points or becomes stationary,
the unit will emit a double beep every 2 seconds.
Orange Collar : double beep
Green Collar : single beep
"Locate" Button
to emit a series of beeps when the button is pushed
and it gives you the ability to keep track of your dog's
location. The current selected sound lasts as long as the
Locate button is pushed down, for up to 12 seconds.
"Sound" Button
The Sound button is located below the Locate button
on the left side of the transmitter. It has four different
sounds.
Initial Beeper
Mode
Sound
- Dog running :
Run/Point Double beep every 7 seconds.
2 Beeps
Mode - Dog on-point :
Double beep every 2 seconds.
Point-Only - Dog running : Remains Silent
1 Beep
Mode - Dog on-point : Double beep every
* NOTE : The locate button can still be utilized in
whichever mode you choose.
56
LCD
Action
screen
r-P
- P -
Transmitter Power ON/OFF
The button on the right side of the transmitter is the
ON/ OFF button that activates the transmitter only and
LCD screen.
To turn the transmitter on, press the ON/OFF button on
the right side of the transmitter. The "rb" will appear on
the LCD screen, if it is turned on.
To turn the transmitter off, press the ON/OFF button on
the right side of the transmitter. When the LCD screen
displays "OFF", release the button.
57