Optional | How To Use The Blank Strainer - Kuvings M7 ULD-732NB Manuel

OPTIONAL | HOW TO USE THE BLANK STRAINER

Before use, make sure the silicone ring is correctly in place.
1 1
To assemble the top set, place the juicing screw
and the blank strainer in the juicing bowl and
close the lid.
①
Insert the blank strainer into the juicing
while aligning the red dots ● of the blank strainer
and the juicing bowl.
② Insert the juicing screw into the blank strainer
with a twisting motion.
③
Place the lid onto the juicing bowl by aligning the
red dots ● of the lid and the juicing bowl. Then,
rotate the lid clockwise until the lid is secured.
When using the blank strainer,
always leave the Smart Cap open.
1 2
Place the assembled top set onto the base.
Top Set
Base
22
Lid
bowl
Juicing Screw
* use the same
juicing screw from
the Slow Juicer
Blank Strainer
Juicing Bowl
▼
Align the arrow from the lid with the
OPEN sign from the base and rotate the
topset clockwise until the arrow ▼ from
the lid is in CLOSE position.
CAUTION
The blank strainer is used only with frozen ingredients. Depending on the different
ingredients, allow the frozen items to thaw for 5 to 20 minutes before use. Slowly
process a smaller amount per batch.
※ Do not use ice or process ingredients containing vegetable or animal oil.
It may cause a malfunction.
※ Remove hard seeds from the ingredients and peel the skins from the ingredients
before juicing.
HOW TO CLEAN THE SILICONE RING
* Dissemble is opposite of Assemble.
The silicone ring is removable for cleaning.
After cleaning, place the silicone ring on
as shown in the picture.
TIP |
Carefully place the silicone ring
by aligning grooves and wedges.
23