How To Clean Silicone Parts; Optional | How To Use The Cleaning Tool - Kuvings M7 ULD-732NB Manuel

HOW TO CLEAN SILICONE PARTS

Tip |
Clean the rotation wiper under running water.
Thoroughly dry after cleaning. Before assembling the top-set, ensure that the silicone ring is
firmly inserted.
Note |
If the silicone ring is not firmly inserted, juice may leak from the bottom of the juicing bowl.
20
Silicone Brush
Pull out the silicone brush from
the rotation wiper to clean.
After cleaning, insert into the slot
with the tail pointing down as
shown in the illustration.
Silicone Ring
Remove the silicone ring from
strainer to clean.
After cleaning, push in the silicone
ring as shown in the picture.
Smart Cap
Remove from the juice spout
to clean.
After cleaning, attach the smart
cap to the smart cap silicone on
the juice spout.

OPTIONAL | HOW TO USE THE CLEANING TOOL

Tip |
The cleaning tool makes clean-up quick and easy.
Completely dry after cleaning.
1 1
Hold the cleaning tool with one hand and insert
the strainer into the cleaning tool.
Note |
Insert the strainer until you hear a click.
Under running water, rotate the cleaning tool and
2
the strainer in opposite directions to clean.
Thoroughly rinse the inside and outside of
3
the strainer under running water.
After cleaning, remove the strainer from the
4
cleaning tool. Dry before storing.
21