Assembly; Operating - Kuvings M7 ULD-732NB Manuel

ASSEMBLY

STEP 1
Top-set Assembly
Check Before • Wash the parts before first use.

Operating

• Ensure that the silicone ring is assembled properly.
Assemble the strainer into the rotation
1
wiper then place this assembly in to the
●
juicing bowl ensuring the red dot on
the strainer is aligned with the red dot ●
on the juicing bowl.
Place the juicing screw into the strainer.
2
Turn and press down on it until it clicks
into place.
Note | The juicing screw needs to be locked in
place in order to close the drum lid.
8
Place the drum lid on to the juicing bowl
3
aligning the red dot ● on the drum lid with
●
the red dot on the juicing bowl. Turn
clockwise to close, aligning the red dot ●
on the drum lid with the close mark .
STEP 2
Top-set and Base Assembly
For easy assembly hold the drum lid
TIP
by grabbing the feeding tube and turn
clockwise as shown in the illustration.
Place the drum lid on the juicing bowl.
4
Align the down arrow ▼ on the drum
lid with the OPEN mark on the base
and turn to the CLOSE position.
5
Open/Close mark on the top-set.
Open
Close
Note | The juicer will not operate if the down arrow
▼ on the drum lid is not completely aligned
with the CLOSE mark on the body.
6 Place the pulp cup under the pulp
spout and place the juice cup under the
juice spout as shown in the illustration.
Detachable
9