Care & Maintenance - aidapt Malling VG833 Notice D'utilisation Et D'entretien

COMPOSITION
The perching stools are made from mild steel PPA/ epoxy coated with upholstered CMHR
foam and fire retardant vinyl seats or contoured polyurethane seats.
CLEANING
Clean your product using a mild detergent with a slightly damp, soft cloth only. Only use a
mild detergent or disinfectant; never use an abrasive cleaner. After cleaning, wipe with a dry,
soft cloth if necessary. Do not leave in direct contact with a heat source.
REISSUE
If you reissue or are about to reissue this product, please thoroughly check all components
for their safety.
This includes:
Tightness of all nuts/bolts/castors and other screw in/bolt in/push in components.
•
• Also check all upholstery (if applicable) for security, splits, exposed staples, etc.
If in any doubt, please do not issue or use, but immediately contact your supplier for
service support.
CARE & MAINTENANCE
Please make a safety check of the product at regular intervals or if you have any concerns.
IMPORTANT INFORMATION
The information given in this instruction booklet must not be taken as forming part of or
establishing any contractual or other commitment by Aidapt Bathrooms Limited, Aidapt
(Wales) Ltd or its agents or its subsidiaries and no warranty or representation concerning the
information is given.
Please exercise common sense and do not take any unnecessary risks when using this
product; as the user you must accept liability for safety when using the product.
Please do not hesitate to contact the person who issued this product to you or the
manufacturer (detailed below) if you have any queries concerning the assembly/use of your
product.
Aidapt Bathrooms Ltd, Lancots Lane, Sutton Oak, St Helens, WA9 3EX
Telephone: +44 (0) 1744 745 020 • Fax: +44 (0) 1744 745 001 • Web: www.aidapt.co.uk
Email: accounts@aidapt.co.uk • adaptations@aidapt.co.uk • sales@aidapt.co.uk
Fixing and Maintenance Instructions
4
Ver. 5 05/2014 (1549)