Platinum CM4605T Mode D'emploi page 10

ENGLISH
TROUBLE SHOOTING
Symptom
Carafe leaks water or
water leaks out from
lid of carafe
The metal parts in
the tank have rust.
Water leaks from the
bottom of coffee
maker.
Water leaks out of
outer side of filter.
Acid (vinegar) taste
exists in Espresso
coffee.
The coffee maker
cannot work any
more.
The steam cannot
froth.
Cause
The carafe is not adjusted properly
The level of water in the tank
exceeds the scale of MAX.
The descaler is not of the
recommended type. It may corrode
the metal parts in the tank.
There is too much water in the drip
tray.
The coffee maker is
malfunctioning.
There is some coffee powder on
filter edge.
Did not clean correctly after
cleaning mineral deposits.
The coffee powder is stored in a
hot, wet place for a long time. The
coffee powder turns bad.
The power cord is not plugged in
properly.
The steam ready indicator (green
indicator) is not illuminated.
The container is too big or the
shape does not fill well.
You have used skimmed milk
Corrections
Ensure center line of carafe aligns with leakage
opening of brew basket well.
The water level in the tank should be within the
scale of MIN and MAX.
Use the descaler recommended by
manufacturer.
Please clean the drip tray.
Please contact the authorized service facility for
repair.
Get rid of the coffee powder.
Clean coffee maker as indicated in "before the
first use" several times.
Please use fresh coffee powder, or store
unused coffee powder in a cool, dry place. After
opening a package of coffee powder, reseal it
tightly and store it in a refrigerator to maintain
its freshness.
Plug the power cord into a wall outlet correctly,
if the appliance still does not work, please
contact the authorized service facility for repair.
Only after the steam ready indicator (green
indicator) is illuminated, the steam can be used
to froth.
Use tall and narrow cup.
Use whole milk or half-skimmed milk
9