Maintenance, Care And Safety Precautions; Care And Maintenance - Argos Technologies StarFireXT Mode D'emploi

Argos Technologies StarFire XT — Operator's Manual

Maintenance, Care and Safety Precautions

Care and Maintenance

WARNING
Allow the burner head to cool down before cleaning, disinfecting, or servicing
StarFire XT. Always switch off and disconnect StarFire XT from the mains power
supply and the gas supply. Allow the device to dry before using it again.
StarFire XT can be cleaned with a soft cloth and most commercial disinfectants. A 70%
ethanol solution can also be used.
The burner head can also be cleaned by following the removal procedure (see page 12)
and cleaning with soap or commercial disinfectants.
Should the burner head fail to ignite you may try using a 70% ethanol solution applied
with a nylon swab to clean the ignition electrode. Once the electrode is bent, however, it
will no longer ignite and must be replaced.
DANGER
Before cleaning the equipment, remove the plug from the power supply. Never use
aggressive solutions such as nitro thinners, etc.
19