Button Operating Mode; Adjusting The System Parameters - Argos Technologies StarFireXT Mode D'emploi

Argos Technologies StarFire XT — Operator's Manual
Menu Functions

BUTTON operating mode

In the BUTTON operating mode, pressing the MENU KNOB briefly will ignite and
extinguish the flame.
NOTE
i
The maximum burning time is factory-set to 1 minute for safety reasons. This can be
changed in Settings (see "Adjusting the system parameters" below).

Adjusting the system parameters

While in the SETTINGS Menu, you can scroll through the following functions by
rotating the menu knob and then pressing to select the required parameter.
Parameter
(cont.)
Description
Specifying the
desired language
Specify the
maximum burning
time in the
BUTTON operating
mode.
The device will
automatically shut
down after this
amount of time of
inactivity.
Changes the level
of sensitivity for the
sensor
Setting how many
times the sensor
must be activated
to ignite flame
(once or twice in
quick succession)
Restores the
default factory
settings.
15
Default
Range
Setting
English
Deutsch
Français English
Italiano
Espanol
1 – 60
1 min
min off
1 – 60
15 min
min off
Low
High
High
x1
x2
x2
 
