Getting Started; Connecting Starfire Xt To A Power Supply; Operating Starfire Xt With Optional Battery; Inserting Or Replacing The Battery - Argos Technologies StarFireXT Mode D'emploi

Argos Technologies StarFire XT — Operator's Manual

Getting Started

Please ensure that all packaging materials have been removed before you start using
your StarFire XT. Place StarFire XT on a flat and dry surface.

Connecting StarFire XT to a power supply

• StarFire XT is supplied with a mains adapter power supply.
• Attach the mains adapter with the primary adapter suitable for your power line
socket outlet.
• Plug in the mains adapter into a standard electrical source and connect it to the
StarFire XT mains plug socket located in the back of the unit.

Operating StarFire XT with optional battery

• StarFire XT can be operated using the optional rechargeable battery pack
(see "Accessories and Spare Parts" on page 21) when not connected to a main
electricity supply
CAUTION
STOP
On first use the battery must be charged in StarFire XT for 12 hours without
interruption

Inserting or replacing the battery

• Slide the cover on the battery compartment in the direction of the arrow.
• If necessary, remove the battery. Insert the new battery so that the poles on the inside
point to the contacts of the device.
• Slide the cover into the slot counter to the direction of the arrow until it clicks into
place.
CAUTION
STOP
Do not short-circuit the battery, i.e. do not bypass the two poles with a conductive
object.

Charging the battery

When initially inserting a new battery and when the battery is low it will need to be
charged. This is performed in the device. StarFire XT is designed to include charge
protection which will prevent the battery from being over charged. This ensures
maximum battery life.
• To charge the battery plug StarFire XT into the mains using the mains adapter
provided. StarFire XT can be on or off.
• After about 12 hours the battery is fully charged. Ensure the mains power supply
is connected for the full 12 hours. Once charged the mains power supply should be
disconnected.
NOTE
StarFire XT can be used while the battery is charging although the battery may take
i
longer to charge fully. To prolong battery life, it is recommended that the battery be
removed if StarFire XT will be connected to the mains power supply for extended
periods.
9