Function; Led Display; Initial Operation - Gardena 19000 Mode D'emploi

Protect the power supply unit from moisture when
connected.
The unit can be used in the temperature range
0 °C – + 40 °C.
Don't use cables – connecting the products to
external / outdoor interfaces.

2. FUNCTION

LED-Display:
1 2

3. INITIAL OPERATION

Contents:
To mount on the wall:
(1)
Internet connection status (LAN / WLAN):
Green: Connected with router and VPN
Yellow: Hotspot mode – not connected with router
Yellow flashing: Connected to mobile phone
3
Red: Not connected
Red flashing: Connected with router; not connected with VPN
(2)
Radio communication status to the smart units:
Green flashing: Receiving data
Yellow flashing: Sending data
3 On / Off
Green: Power On
Green flashing: Booting
Yellow: 1. Factory reset running
2. Error (restart required)
Yellow flashing: Software update
Red: Fatal error (restart required)
– Gateway unit
– Netzteil
– Ethernet­cable
The two screws (not supplied) for attaching the Gateway have to
be screwed into place A horizontally 75 mm / B vertically 50 mm apart
and the screw head diameter must not exceed 8 mm.
A
75 mm
1. Screw the screws into the wall A 75 mm / B 50 mm apart.
2. Attach the unit.
Short Range Device Antennas and WLAN Antenna
are installed in the unit.
External Short Range Device Antennas is optional
available.
Do not use in cellar or nearby metal plates or
engines.
B
50 mm
9