Sauder Carson Forge 412924 Mode D'emploi page 16

Step 11
First, fi ll the four holes in the TOP (D) 1/4 to 1/2 full with GLUE (54M). Then, insert
å
four WOOD DOWELS (15F) into the holes. Wipe away the excess GLUE.
Place a drop of GLUE (54M) on the WOOD DOWELS (15F) located in the corners
å
of the TOP (D).
Carefully turn your unit over and fasten the ENDS (A and B) and BACK (G) to the
å
TOP (D). Tighten six HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the TOP insert into the holes in
å
the LEGS (I, J, K, and L). Wipe away the excess GLUE.
Fasten the BRACE (H) to the UPRIGHT (C). Use a BLACK
å
2-1/4" FLAT HEAD SCREW (26S).
54M
Caution
!
Inspect the parts thoroughly before
assembling. Disassembly of glued
parts is extremely diffi cult.
BLACK 2-1/4" FLAT HEAD SCREW
(1 used in this step)
Maximum
210 degrees
Minimum
190 degrees
Page 16
K
15F
26S
Arrow
I
15F
A
G
H
C
D
Curved edge
412924
Fill the holes 1/4 to 1/2 full with GLUE.
L
B
www.sauder.com/services
J
15F