Unpacking Instructions - Fanimation XENO FP6728BBN Mode D'emploi

For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all steps have been
completed and will be helpful in finding your place should you be interrupted.
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts supplied with
this product and/or any accessories designated specifically for use with this product by Fanimation. Substitution of parts
or accessories not designated for use with this product by Fanimation could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
Hanger Bracket
Assembly
Motor Assembly
Hardware Bags
3/16˝-24 Washer Head
Screws (10)

Unpacking Instructions

Light Plate/Glass Assembly
Fiber Washers (10) Wire Connectors (4)
WARNING
Steel Cap Assembly
Safety Cable Kit
Safety Cable (1)
4
Light Kit Wire Cover
Assembly
Hand-held Remote (1)
Wall Holder (1)
Screws (2)
Batteries (2)
LED Assembly
Receiver (1)
Wire Connectors (6)
Cable Clamp (1) Flat Washer,
Stainless Steel
(1)
12V 23A
Blade Set
Lag Bolt
(1)