15. Settings of lowering speed
a. Loosen the counter nut (1) of the lowering valve (106; 2).
b. Set the lowering speed as indicated in the technical data.
c. Turning the grub screw of the lowering valve (106; 2) clockwise lowers the lift more slowly, turning
it counterclockwise lowers it faster.
d. At the end of the work, secure your setting by tightening the counter nut of the lowering valve
(106; 2)
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2021-04
Manufacturer ATH-Heinl GmbH & CO.KG
- 35 -