English; General Safety Rules - EGAmaster 60194 Manuel D'instructions

ENGLISH

1. Pressing jaw
2. Pressing contuor
3. Pressing tongs
4. Bolt
5. Tong retaining bolt
6. Housing grip
7. Inching switch
8. Pistol grip
Read all instructions. Failure to follow all instructions listed below may result in electric
shock, fire and/or serious injury. Then term "power tool" in all of the warnings listed below refers
to your mains operated (corded) power tool or battery operated (cordless) power tool, also ma-
chines and electric units. Only use the power tool for the purpose for which it was intended, with
the due attention to the general safety and accident prevention regulations.
Work area
- Keep work area clean and well it. Cluttered and dark areas invite accidents
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
- Keep children and bystanders away while operating a power tool. Distractions can cause you
lose control.
Electrical safety
- Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce
risk of electric shock. If the power tool comes with an earthed wire, the plug may only be
connected to an earthed receptacle. At work sites, in damp surrounding, in the open or in the
case of comparable types of use, only operate the power tool off the mains using a 30mA
fault current protected switch (FI breaker).
- Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
- Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
10

GENERAL SAFETY RULES