Horizon Global 25004 Instructions D'installation page 5

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3c) Use phillips screwdriver to remove (1) screw under driver side taillight and
flathead screwdriver to remove (1) push rivet. Repeat for passenger side.
5. Remove fascia - Use plastic trim tools to remove the fascia starting at the
outer edges near the wheel wells and gently pull the fascia. Carefully set the
fascia aside for reinstallation. Disconnect any sensors if present.
©2022 Horizon Global™ Corp - Printed in Mexico
4. Loosen wheel well liner – Use phillips screwdriver to remove (4) screws from
wheel well liner on driver side. Repeat this process for passenger side
6. Remove end panel/impact bar hardware – Using 13mm socket remove (4)
8mm screws from impact bar/end panel. Return to owner.
Sheet 5 of 18
25004NP
1-24-22
Rev. A

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

78297Cqt25004

Table des Matières